iFi's super affordable phono stage makes your vinyl sound purer than ever.
iFi Zen Air Phono Preamplifier
- Australian Stock
- Australian Warranty
- Authorised Reseller
Found it cheaper somewhere else? Request a price match.
Don't risk purchasing a fake!
MiniDisc are Authorised Resellers
21 Day Change of Mind Returns
Terms and conditions apply
Free Shipping Australia Wide
Free Shipping & Express available
Unmatched advice and support
Always happy to help
Enjoy a purer listening experience with the ZEN Air Phono, iFi's super affordable phono stage.
A phono stage, also called a phono pre-amp, provides the connection between the record cartridge/pickup (stylus) and the amplifier.
Turntable cartridges output a very small signal. This signal needs amplifying up to several hundred times the original size before it is loud enough for your amplifier. A phono stage increases the signal level from millivolts to volts.
When vinyl was the standard for audio recording, the phono stage was built-in to receivers and amps, allowing direct connection of a turntable. These days most receivers and amps do not contain a phono stage so a separate unit is needed.
It is a necessity for any turntable without a phono stage already built in. It will also upgrade a basic built-in phono stage in a turntable or amplifier system.
|Power supply requirement||DC 5V/1.0A (centre +ve)|
|Frequency Response||20Hz -20kHz (±0.15dB)|
|Channel Separation||> 75dB (1kHz all modes)|
|Max Output Voltage||RMS6.5V RMS 600Ω(<1% THD & N)|
|Gain||MM 40dB / MC 64dB|
|Input Impedance||MM 47k / MC 1k|
|SNR||MM (40dB ±1dB)
MC (64dB ±1dB)
|86dB (A-weighted) re 1V
82dB (A-weighted) re 1V
|Ein (equivalent input noise)||
|0.6nV | /Hz (unweighted) 6.5nV | /Hz (unweighted)
|Total Harmonic Distortion||MC
|<-80dB / 0.01% re 1V
<-90dB / 0.005% re 1V
|Dimensions||158 x 117 x 35 mm
6.2" x 4.6" x 1.4"